Save Product
Product Details
Synonyms
STAT3, signal transducer and activator of transcription 3
Source
Human STAT3, His Tag (ST3-H5149) is expressed from E. coli cells. It contains AA Gly 127 - Arg 688 (Accession # P40763-1).
Predicted N-terminus: Met
Request for sequenceMolecular Characterization
Other Tags and Version Biotin & Other Labeled Version
This protein carries a polyhistidine tag at the N-terminus.
The protein has a calculated MW of 66.4 kDa. The protein migrates as 66-70 kDa when calibrated against Star Ribbon Pre-stained Protein Marker under reducing (R) condition (SDS-PAGE).
Endotoxin
Less than 0.01 EU per μg by the LAL method / rFC method.
Purity
>95% as determined by SDS-PAGE.
Formulation
Lyophilized from 0.22 μm filtered solution in 50 mM Tris, 150 mM NaCl, pH7.5 with trehalose as protectant.
Contact us for customized product form or formulation.
Reconstitution
Please see Certificate of Analysis for specific instructions.
For best performance, we strongly recommend you to follow the reconstitution protocol provided in the CoA.
Shipping and Storage
This product is shipped at ambient temperature.
For long term storage, the product should be stored at lyophilized state at -20°C or lower.
Please avoid repeated freeze-thaw cycles.
This product is stable after storage at:
- -20°C to -70°C for 12 months in lyophilized state;
- -70°C for 3 months under sterile conditions after reconstitution.
ACRO Quality Management System
Customers Also Viewed
Performance Data
SDS-PAGE
Human STAT3, His Tag on SDS-PAGE under reducing (R) condition. The gel was stained with Coomassie Blue. The purity of the protein is greater than 95% (With Star Ribbon Pre-stained Protein Marker).
SEC-MALS
The purity of Human STAT3, His Tag (Cat. No. ST3-H5149) is more than 85% and the molecular weight of this protein is around 60-75 kDa verified by SEC-MALS.
Report
Bioactivity-SPR
Human STAT3, His Tag (Cat. No. ST3-H5149) immobilized on CM5 Chip can bind STAT3 degrader with an affinity constant of 44.6 nM as determined in a SPR assay (Biacore 8K) (QC tested).
Protocol
Bioactivity-BLI
Loaded Human STAT3, His Tag (Cat. No. ST3-H5149) on NTA Biosensor, can bind STAT3 degrader with an affinity constant of 29.4 nM as determined in BLI assay (ForteBio Octet Red96e) (Routinely tested).
Protocol
Customer Reviews Writing Reviews
FAQ
- product
Can lyophilized proteins remain stable during room-temperature shipping or temporary room-temperature exposure?
In general, lyophilized proteins remain stable during room-temperature shipping or temporary exposure to room-temperature conditions.
Many ACROBiosystems recombinant proteins are supplied in lyophilized (freeze-dried) form. The lyophilization process effectively removes moisture from the product, helping reduce degradation-related reactions and improve protein stability during transportation and storage.
To evaluate the stability of lyophilized proteins under normal temperature conditions, ACROBiosystems conducted a stability study on 11 representative lyophilized protein products at 37°C. The study demonstrated that these proteins maintained good quality stability after storage at 37°C for approximately 20 days. Based on these validation results, temporary room-temperature exposure during shipping or handling is generally not expected to have a significant impact on product quality or downstream application performance.
To ensure optimal long-term stability, products should be stored according to the storage conditions specified in the product Certificate of Analysis (COA) upon receipt.
Supporting Document
Background
Recent Advances
Drug Development Progress- English Name：
Signal transducer and activator of transcription 3
- Category：
- Approved Drugs：
4 Details
- Drugs in Clinical Trials：
21 Details
- Highest Development Stage：
Approved
Contact Us
[North America]: +1 800-810-0816
[Switzerland]: +41 800 040 012
[Asia & Pacific]: +86 400-682-2521
Drug Candidate Licensing
