|Standard Curve Range||0.0025 U-3.9×10⁻⁵ U|
|Assay Time||30 min|
|Suitable Sample Type||For the quantitative determination of DNase I in the environment, some biological materials, common molecular biological reagents such as reaction buffers.|
|Sample volume||10 μL & 80 μL|
|DNase Substrate||2 nmol||10 nmol|
|10X Reaction Buffer for DNase||10 mL||10 mL|
|DNase I (1U/μL)||20 μL||50 μL|
|TE Buffer (pH 8.0)||1.5 mL||6 mL|
|Nuclease-free Water||10 mL||50 mL|
DNases are ubiquitous in both the environment and many biological materials. Many molecular biology experiments rely on the use of plastics, chemicals, and solutions that are free from detectable DNase activity, once these materials are contaminated with DNases, the experiments will be affected because of the DNases can degrade DNA. Since even only minute amounts of DNase contamination would ruin the experiment, it is necessary to evaluate the presence of DNase with a reasonable method.
Published methods for detecting DNase such as Nucleic acid hydrolyzed gel electrophoresis and ultraviolet spectrophotometer are typically time consuming, not quantitative, and relatively insensitive. The other methods such as HPLC and electrochemical methods are limited to instrumentation.
In contrast, the DNase Activity Assay Kit (Fluorescence) can detect DNase contamination within 30 minutes, and the kit is high sensitivity, easy to use. Moreover, the DNase and RNase Activity Assay Kit (Fluorescence) have been designed to work together seamlessly for simultaneous quantitative detection of DNases and RNases in a single sample.
The DNase Activity Assay Kit (Fluorescence) is a convenient and sensitive assay tool to test the presence of DNase in buffers, reagents, and other components.
It is for research use only.
Find the expiration date on the outside packaging and do not use reagents past their expiration date.
The opened kit should be stored per components table. The shelf life is 3 months from the date of opening.
Add 90 μL of the working DNase Substrate solution to each 96-well plate, and add 10 μL of DNase I standards (0.00000390625-0.00025 U/μL*10μL/well = 0.0000390625-0.0025U/well), incubate the plate in the fluorometer (BMG CLARIOstar) collecting real-time data at 1 minute intervals for 30 minutes at 37°C using the settings described in this section. The DNase Activity Assay can be evaluated in rigorous kinetic terms using real-time data.
This assay kit employs a standard detection of DNase I. Add 90 μL working DNase Substrate solution to each 96-well plate, and add 10 μL DNase I standards ((0.00000390625-0.00025 U/μL*10μL/well = 0.0000390625-0.0025U/well), incubate for 30 minutes at 37°C. Then measure the fluorescence using the settings described in this section in a fluorometer (BMG CLARIOstar). Take RFU of standards as the ordinate and DNase concentration as the abscissa. Four parameters logistic are used to draw the standard curve (QC tested).
Eight replicates of each of seven samples containing different concentrations of DNase were tested in one assay, Intra-Assay Precision CV＜10%.
Eight replicates of each of seven samples containing different concentrations of DNase were tested in eight independent assays, Inter-Assay Precision CV<15%.
The probe is freeze-thawed 3 times, the kit performance meets the requirements, the sensitivity is not reduced, and the CV< 10%.
Three different concentrations of DNase was spiked into four different kinds of matrixes. The range of the recovery rate is 80%~120%.
DNase Activity Assay Kit (Fluorescence) (Cat. No. ASE-A002) and RNase Activity Assay Kit (Fluorescence) (Cat. No. ASE-A001) were used to detect nuclease residues in the same sample. No significant cross-reactivity or interference was observed.
Please contact us via TechSupport@acrobiosystems.com if you have any question on this product.
Price(USD) : $348.00
Price(USD) : $698.00
ACROBiosystems has developed a series of homogeneous CD3δ/CD3ε and CD3γ/CD3ε proteins with high bioactivity, to help accelerate the clinical development of a bispecific antibody into a therapeutic.
To enable antibody characterization methodsACROBiosystems has developed a series of enzymes.such as ldeS, SpeB, EndoH, and Endo S proteases, toassist with the characterization of antibodies and theirrelated post-translational modifications (PTMs)
ComboX is a new brand of ACROBiosystems. ComboX products include our Streptavidin series products, coated plates, isotype controls for antibody and fusion protein drug research, and general-purpose antibodies.
50+ targets designed for CAR detection, including PE/FITC/biotin labeled proteins. The key reagents for CD19 and BCMA were FDA DMF filed which can support your IND, NDA and BLA process.
ACROBiosystems developed a series of GMP grade cytokines under the GMP grade quality management system. Those products are all suitable for T/NK cell generation, activation, and proliferation in cell therapy research.
GMP grade cytokines, reagents for cell activation, gene edition, DNA/RNA removal, etc. Particularly focus on product design, quality control and solution-based support to link each phase of your cell and gene therapy journey.
Full length multi-pass TPs with stabilized structure and high bioactivity for immunization, antibody screening, cell based assay and CAR detection, including hot CD20, Claudin 18.2， CD133, GPRC5D，CCR8, CCR5, etc.
A series of immune checkpoints including classic co-inhibitory and co-stimulatory receptors. The comprehensive catalog contains 100+ targets with various species and tags, and the high-quality proteins are in good batch-to-batch consistency.
To meet the needs of ADCs development, ACROBiosystems can provide: A variety of high-quality target proteins; MMPs/Cathepsin/uPA for cleavable linker; Anti-payload antibodies & anti-idiotypic antibodies for immunogenicity and PK analysis; SPR/BLI analytical and ADA development service.
Comprehensive collection of Fc receptor proteins, including their common variants, which can help expedite your antibody development.
Comprehensive cytokine targets including interleukins, growth factors, chemokines, TNFs, etc. are expressed by HEK293 to ensure their natural structure. Their high purity is verified by SDS-PAGE/HPLC/SEC-MALS and high bioactivity is verified by ELISA/SPR/BLI.
Aneuro is ACROBiosystems brand focused on neuroscience research, providing high-quality important proteins including therapeutic and diagnostic research proteins, PFFs and recombinant neuro factors, etc. to advance neuroscience research.
This web search service is supported by Google Inc.